MTM Hydro PF22.2 Foam Cannon with Cherry Soap - 475 ml ***


Price:
Sale price$139.99 CAD

Description

MTM Hydro's Italian Manufactured PF22.2 Foam Cannon is the new standard in the foaming industry and stands alone as the most reliable foam Cannon in the industry. With its new standing bottle you no longer have to worry about spills and tipping over. Whether you are foaming down your car on the weekend or you are a professional contract cleaner foaming hog barn for hours, this tool will save you time and money. Simply attach the foam cannon to your pressure washer using one of the included fittings, fill with your desired ratio of chemical in the calibrated standing bottle and you are up and running.

NOTE A specific 1/4" Male plug may be required in order to attach the QC plug to the end of some residential pressure washer setups. MTM Hydro 1/4" plugs are standard for industrial use but many residential pressure washers such as Generac, Greenworks, Ryobi, AR Blue Clean,etc... have certain models where the coupler will not receive an MTM plug. Not all of these brands are impacted, just certain models. If you look closely, the Chamfer at the end of an MTM plug as well as the neck is, 1.5mm shorter than some couplers may allow. We now offer this new Low Profile QC plug under item #24.5006. Once you install the correct plug in your new MTM Foam Cannon, you sill see that it was worth finding this specialized fitting as our foam cannons are second to none, even when manufactures try to change their fittings!

Contents of the PF22 Foam Cannon Kit:

  • Italian Nickel Plated Brass -Single Cast Foam Cannon body

  • Italian Calibrated 32 oz New Stand up Grey Bottle

  • 1/4" x 9" tube for drawing chemical

  • 3.5 Orifice (1.25mm) installed in the Foamer Body

  • 3.0 Orifice (1.1mm) included with kit

  • Fitting pack (2-peices) containing a 1/4" M22 adaptor and 1/4" QC Plated Steel Plug

  • Manual with care instructions and exploded view

Specs:

  • Min. 1,100 psi - Max. 5,000 psi

  • Min. 1.4 gpm - Max. 5.3 gpm

  • Max. 140°F

Note: The full spectrum of ratings are not supported by the 3.5 or 3.0 orifices included with this kit. Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice. For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass. You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine. MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice. See below for additional orifice sizes and replacement items available for purchase. 

Foam Cannon Replacement Items and Upgrades:

  • 5.0 Orifice (1.5mm) - Part #36.0235 

  • 6.5 Orifice (1.7mm) - Part #36.0236

  • Replacement White Bottle - Part #37.0253

  • Replacement Grey PF22 Bottle (New)- Part #37.5022 

  • Replacement 9" Suction Tube - Part #41.0338

  • Replacement Filter - Part #36.0226

  • Repair Kit for Original Foam Cannon including O-Rings - Part #41.0400

  • Repair Kit for PF22 Foam Cannon including O-Rings - Part #41.5001

  • Karcher Brass Bayonet and fitting - Part #s 24.0459 & 24.0127 Purchase both

  • Karcher Plastic Bayonet and fitting - Part #s 37.0259 & 24.0127*Purchase both*

  • 1/4" x 33' Hose for Foam Jet Kit with Chem Filter - Part #41.0401"

You may also like

Recently viewed